EIT LiQlyzer Conductive Electrode Level Holder & Sensor

Conductivity level switches use conductance measurement or conductivity sensing technologies to determine the level of a liquid. The conductance method of liquid measurement and control is thought to be quite straightforward to use. The electrical conductivity or conductance of the process fluids being measured determines how well they perform. When using a low voltage power source, which normally has a voltage of under 20 Volts, the liquid being measured can typically conduct a current. Using a dual-tip probe, which avoids the requirement for grounding a metal tank, is one typical method of establishing an electrical connection. The interface between a conductive and nonconductive liquid can be the detected point when using such probes, which are typically employed for point level detection.

	LQCEL-H	LQCEL-S
Housing Material	Stainless Steel 304
Protection	IP65
Probe Insulation Material	PTFE
Pressure	0 ~ 2.4Mpa
Temperature	0 ~ 120°C
Process Thread Connection	G1" BSP male
Rod Probe Size	6/8/10/12 mm
Rod Probe Number	1/2/3/4

EIT LiQlyzer BMC Level Holder & Sensor

BMC compound is a high-performance fiber reinforced thermosetting precision molding material. It can provide more outstanding properties than metal or plastic by the way of professional formula

Heavy Duty Single Electrode Holder

TECHNICAL INFORMATION

Good stand to high moisture and heat and low linear expansion coefficient

Good mechanical strength and electrical property

The HDT(Heat Distortion Temperature) can stand over to 200째C

UV Resistant

Good flame resistance can meet UL-94 standard

Chemical resistant

APPLICATIONS

Ideal for level of any conductive liquid (sewage and water)

ELECTRODE

3/4" Dia. (26.5mm Dia.) Stainless Steel 316 Electrode encapsulated in heat shrinkable sleeving